Diseño y construcción de un prototipo de estación de carga para bicicletas eléctricas

The following research work shows the design and construction of a prototype charging station for electric bicycles based on the collection of information provided by companies dedicated to the construction of this means of transport, thus exposing various electrical parameters for the operation of the equipment and the battery as a vital element. The mathematical procedure for the design of the Buck type power converter is carried out, as well as the selection of the electronic elements necessary for the operation of the power system. Then the necessary calculations for the design of the control were executed, starting from the basic differential equations for the generation of the signal that allows controlling the voltage, all this through the MATLAB^® sisotool tool, which allows applying the method of poles and zeros in the geometric location of the roots. Furthermore, there is the selection of the controller that commands the power system, and an alternative power supply method for the converter corresponding to a photovoltaic system. Finally, and most importantly, the construction of the prototype connected to the electrical network by using the selected components, since the specimen achieve favorable results from experimentation, it will be useful for educational purposes and future studies. Keywords: Electric bicycles, charging station, Buck geared converter.

• 1. autor: Sarango Uchuari, Klever Ivan (author)
• Format: bachelorThesis
• Wydane: 2022
• Hasła przedmiotowe: <BICICLETAS ELÉCTRICAS< ESTACIÓN DE CARGA> < CONVERTIDOR REDUCTOR BUCK>
• Dostęp online: https://dspace.unl.edu.ec/jspui/handle/123456789/24862