Diseño de un pasteurizador de leche de 100 litros para la alimentación de terneros.

In the present work, a design of a pasteurizing equipment for feeding calves was proposed as an alternative for farmers to raise calves until weaning, which can be approximately 45 to 75 days. Establishing important characteristics such as: the milk pasteurization cycle, avoiding contamination in th...

Descripción completa

Guardado en:
Detalles Bibliográficos
Autor principal: Quirola Manchay, Santiago David (author)
Formato: bachelorThesis
Lenguaje:spa
Publicado: 2022
Materias:
Acceso en línea:https://dspace.unl.edu.ec/jspui/handle/123456789/24738
Etiquetas: Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
_version_ 1857833196342738944
author Quirola Manchay, Santiago David
author_facet Quirola Manchay, Santiago David
author_role author
collection Repositorio Universidad Nacional de Loja
dc.contributor.none.fl_str_mv Ortega Reyes, Cristian Vinicio
dc.creator.none.fl_str_mv Quirola Manchay, Santiago David
dc.date.none.fl_str_mv 2022-05-12T20:38:58Z
2022-05-12T20:38:58Z
2022-05-12
dc.format.none.fl_str_mv 154 p.
application/pdf
dc.identifier.none.fl_str_mv https://dspace.unl.edu.ec/jspui/handle/123456789/24738
dc.language.none.fl_str_mv spa
dc.publisher.none.fl_str_mv Universidad Nacional de Loja
dc.rights.none.fl_str_mv http://creativecommons.org/licenses/by-nc-sa/3.0/ec/
info:eu-repo/semantics/openAccess
dc.source.none.fl_str_mv reponame:Repositorio Universidad Nacional de Loja
instname:Universidad Nacional de Loja
instacron:UNL
dc.subject.none.fl_str_mv <ALIMENTACIÓN DE TERNEROS>< DOSIFICACIÓN DE LECHE>< GANADEROS> < LECHE PARA TERNERO>< PASTEURIZACIÓN>
dc.title.none.fl_str_mv Diseño de un pasteurizador de leche de 100 litros para la alimentación de terneros.
dc.type.none.fl_str_mv info:eu-repo/semantics/publishedVersion
info:eu-repo/semantics/bachelorThesis
description In the present work, a design of a pasteurizing equipment for feeding calves was proposed as an alternative for farmers to raise calves until weaning, which can be approximately 45 to 75 days. Establishing important characteristics such as: the milk pasteurization cycle, avoiding contamination in the pasteurization process at the place of treatment and portability to the place of feeding necessary for the calves, minimizing contact with any contaminating element. Through the designated capacity of 100 liters, each element could be sized for the established functions such as: the practicality and feasibility of the design, the heating system, the agitation system and the dosing pump. With all the elements formed, it was possible to establish a relevant design proposal so that its construction can be carried out. For the temperature control and the desired operating system, the temperature of 65 °C was considered for 30 minutes, for which a PID control was established that allows the stability of the process. Consequently, a stirring system was proposed with the use of a frequency variator. As well as the proposal of a dosing system by means of a pump regulated by the desired flow from 1 liter to the amount as required. Likewise, in the control of the pasteurization, shaker and milk dosing system, the use of an S7-200 PLC was considered, which has the characteristics required for the fulfillment of the different functions. Finally, an autonomy of 4 hours is proposed for operation with the use of the rechargeable battery, which will allow freedom of mobility when feeding the calf in the specific place where the calves are. Key words: calf feeding, milk dosing, farmers, milk, pasteurization.
eu_rights_str_mv openAccess
format bachelorThesis
id UNL_ff2fab4f622f622f37cdfd4ecdb7be33
instacron_str UNL
institution UNL
instname_str Universidad Nacional de Loja
language spa
network_acronym_str UNL
network_name_str Repositorio Universidad Nacional de Loja
oai_identifier_str oai:dspace.unl.edu.ec:123456789/24738
publishDate 2022
publisher.none.fl_str_mv Universidad Nacional de Loja
reponame_str Repositorio Universidad Nacional de Loja
repository.mail.fl_str_mv *
repository.name.fl_str_mv Repositorio Universidad Nacional de Loja - Universidad Nacional de Loja
repository_id_str 0
rights_invalid_str_mv http://creativecommons.org/licenses/by-nc-sa/3.0/ec/
spelling Diseño de un pasteurizador de leche de 100 litros para la alimentación de terneros.Quirola Manchay, Santiago David<ALIMENTACIÓN DE TERNEROS>< DOSIFICACIÓN DE LECHE>< GANADEROS> < LECHE PARA TERNERO>< PASTEURIZACIÓN>In the present work, a design of a pasteurizing equipment for feeding calves was proposed as an alternative for farmers to raise calves until weaning, which can be approximately 45 to 75 days. Establishing important characteristics such as: the milk pasteurization cycle, avoiding contamination in the pasteurization process at the place of treatment and portability to the place of feeding necessary for the calves, minimizing contact with any contaminating element. Through the designated capacity of 100 liters, each element could be sized for the established functions such as: the practicality and feasibility of the design, the heating system, the agitation system and the dosing pump. With all the elements formed, it was possible to establish a relevant design proposal so that its construction can be carried out. For the temperature control and the desired operating system, the temperature of 65 °C was considered for 30 minutes, for which a PID control was established that allows the stability of the process. Consequently, a stirring system was proposed with the use of a frequency variator. As well as the proposal of a dosing system by means of a pump regulated by the desired flow from 1 liter to the amount as required. Likewise, in the control of the pasteurization, shaker and milk dosing system, the use of an S7-200 PLC was considered, which has the characteristics required for the fulfillment of the different functions. Finally, an autonomy of 4 hours is proposed for operation with the use of the rechargeable battery, which will allow freedom of mobility when feeding the calf in the specific place where the calves are. Key words: calf feeding, milk dosing, farmers, milk, pasteurization.En el presente trabajo se propuso un diseño de un equipo pasteurizador para la alimentación de los terneros, como una alternativa para los ganaderos en la crianza de terneros hasta el destete que puede ser de 45 a 75 días aproximadamente. Estableciendo características importantes como: el ciclo de pasteurización de leche, evitando contaminación en el proceso de pasteurización en el lugar de tratamiento y la portabilidad hasta el lugar de alimentación necesaria para los terneros, impidiendo en lo mínimo el contacto con cualquier elemento contaminante. A través de la capacidad designada de 100 litros, se pudo dimensionar cada elemento que lo conforma y estableciendo características como: la practicidad y factibilidad del diseño, el sistema de calentamiento, el sistema de agitación y la bomba dosificadora. Con todos los elementos conformados se pudo establecer una propuesta de diseño pertinente para que se pueda realizar su construcción. Para el control de temperatura y del sistema de funcionamiento deseado, se consideró la temperatura de 65 °C durante 30 minutos para lo cual se estableció un control PID que permite la estabilidad del proceso. Consecuentemente se propuso un sistema de agitación con uso de un variador de frecuencia, así como la propuesta de un sistema de dosificación por medio de una bomba regulada por el caudal deseado desde 1 litro hasta la cantidad según se requiera. Así mismo, en el control del sistema de pasteurización, agitador y dosificación de la leche, se consideró el uso de un PLC S7-200, que cuenta con las características requeridas para el cumplimiento de las distintas funciones. Finalmente, se propone un diseño de un equipo para la alimentación de terneros, el cual dispondrá la libertad de movilidad al momento de alimentar la cría en el lugar específico donde se encuentran los terneros. Palabras claves: alimentación de terneros, dosificación de leche, ganaderos, leche, pasteurización.Universidad Nacional de LojaOrtega Reyes, Cristian Vinicio2022-05-12T20:38:58Z2022-05-12T20:38:58Z2022-05-12info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/bachelorThesis154 p.application/pdfhttps://dspace.unl.edu.ec/jspui/handle/123456789/24738spahttp://creativecommons.org/licenses/by-nc-sa/3.0/ec/info:eu-repo/semantics/openAccessreponame:Repositorio Universidad Nacional de Lojainstname:Universidad Nacional de Lojainstacron:UNL2025-05-02T18:22:54Zoai:dspace.unl.edu.ec:123456789/24738Institucionalhttps://dspace.unl.edu.ec/Universidad públicahttps://unl.edu.ec/https://dspace.unl.edu.ec/oaiEcuador***opendoar:02025-05-02T18:22:54falseInstitucionalhttps://dspace.unl.edu.ec/Universidad públicahttps://unl.edu.ec/https://dspace.unl.edu.ec/oai*Ecuador***opendoar:02025-05-02T18:22:54Repositorio Universidad Nacional de Loja - Universidad Nacional de Lojafalse
spellingShingle Diseño de un pasteurizador de leche de 100 litros para la alimentación de terneros.
Quirola Manchay, Santiago David
<ALIMENTACIÓN DE TERNEROS>< DOSIFICACIÓN DE LECHE>< GANADEROS> < LECHE PARA TERNERO>< PASTEURIZACIÓN>
status_str publishedVersion
title Diseño de un pasteurizador de leche de 100 litros para la alimentación de terneros.
title_full Diseño de un pasteurizador de leche de 100 litros para la alimentación de terneros.
title_fullStr Diseño de un pasteurizador de leche de 100 litros para la alimentación de terneros.
title_full_unstemmed Diseño de un pasteurizador de leche de 100 litros para la alimentación de terneros.
title_short Diseño de un pasteurizador de leche de 100 litros para la alimentación de terneros.
title_sort Diseño de un pasteurizador de leche de 100 litros para la alimentación de terneros.
topic <ALIMENTACIÓN DE TERNEROS>< DOSIFICACIÓN DE LECHE>< GANADEROS> < LECHE PARA TERNERO>< PASTEURIZACIÓN>
url https://dspace.unl.edu.ec/jspui/handle/123456789/24738