Aplicación de la escoria de fundición de hierro como agregado en las mezclas de hormigón para pavimentos rígidos

n this research article compares the resistance to compression and bending of a conventional concrete used for the construction of roads (rigid pavement), with a concrete that contains slag of iron smelting in partial replacement of the aggregate thickness (gravel) in percentages of 5%, 10%, 15%. Wi...

全面介紹

Saved in:
書目詳細資料
主要作者: Nasimba Chanataxi, Diego Andrés (author)
格式: bachelorThesis
語言:spa
出版: 2017
主題:
在線閱讀:http://dspace.ups.edu.ec/handle/123456789/14900
標簽: 添加標簽
沒有標簽, 成為第一個標記此記錄!
實物特徵
總結:n this research article compares the resistance to compression and bending of a conventional concrete used for the construction of roads (rigid pavement), with a concrete that contains slag of iron smelting in partial replacement of the aggregate thickness (gravel) in percentages of 5%, 10%, 15%. With this objective, concrete mixtures and their respective cylindrical specimens and standard beams were elaborated to perform the corresponding compression and bending tests. It was concluded that the concrete with 15% slag obtained the best results, with 39,02 MPa in the compression test and 5,35 MPa in the flexure test, without neglecting that with the percentages of 5% and 10%. % of slag also obtained good results with respect to concrete without slag, it should also be known that the physical characteristics of slag concrete decreased (slump). Obtaining thus a concrete of better mechanical characteristics than a normal concrete used for rigid pavement and containing in its composition a material that can be recycled (iron foundry slag), the same that is produced in large quantities annually in Ecuador by the metallurgical industry.