Implementación de biomasa y energía solar en una vivienda ecológica temporal en la empresa Autopartes y Autogrúas FCN S.a. con una capacidad de 1.5 kW-h.

The present research project is to implement “Biomas” and solar energy into a temporary green home with a capacity of 1.5 kW·h; the equipment was tested under different climatic conditions. The taking results was followed through at an interval of 5 minutes for the heat pump and in the case of the p...

Ful tanımlama

Kaydedildi:
Detaylı Bibliyografya
Yazar: Calán Pozo, Juan Carlos (author)
Diğer Yazarlar: Ruales Yépez, Álbaro Paúl (author)
Materyal Türü: bachelorThesis
Dil:spa
Baskı/Yayın Bilgisi: 2018
Konular:
Online Erişim:http://dspace.ups.edu.ec/handle/123456789/16142
Etiketler: Etiketle
Etiket eklenmemiş, İlk siz ekleyin!
_version_ 1858988482688450560
author Calán Pozo, Juan Carlos
author2 Ruales Yépez, Álbaro Paúl
author2_role author
author_facet Calán Pozo, Juan Carlos
Ruales Yépez, Álbaro Paúl
author_role author
collection Repositorio Universidad Politécnica Salesiana
dc.contributor.none.fl_str_mv Quitiaquez Sarzosa, William Giovanny
dc.creator.none.fl_str_mv Calán Pozo, Juan Carlos
Ruales Yépez, Álbaro Paúl
dc.date.none.fl_str_mv 2018-10-01T18:14:30Z
2018-10-01T18:14:30Z
2018-09
dc.format.none.fl_str_mv application/pdf
dc.identifier.none.fl_str_mv http://dspace.ups.edu.ec/handle/123456789/16142
dc.language.none.fl_str_mv spa
dc.rights.none.fl_str_mv Atribución-NoComercial-SinDerivadas 3.0 Ecuador
http://creativecommons.org/licenses/by-nc-nd/3.0/ec/
info:eu-repo/semantics/openAccess
dc.source.none.fl_str_mv reponame:Repositorio Universidad Politécnica Salesiana
instname:Universidad Politécnica Salesiana
instacron:UPS
dc.subject.none.fl_str_mv ENERGÍA SOLAR - APLICACIONES
ENERGÍAS ALTERNATIVAS
BOMBA DE CALOR
CONTENEDORES MARÍTIMOS
PLACAS SOLARES
RADIACIONES SOLARES
dc.title.none.fl_str_mv Implementación de biomasa y energía solar en una vivienda ecológica temporal en la empresa Autopartes y Autogrúas FCN S.a. con una capacidad de 1.5 kW-h.
dc.type.none.fl_str_mv info:eu-repo/semantics/publishedVersion
info:eu-repo/semantics/bachelorThesis
description The present research project is to implement “Biomas” and solar energy into a temporary green home with a capacity of 1.5 kW·h; the equipment was tested under different climatic conditions. The taking results was followed through at an interval of 5 minutes for the heat pump and in the case of the photovoltaic system was tabulated every 20 minutes from 6:20 to 18:20 h for the selection of the optimum angle in Tulcán City where were carried out four days of test with 0’, 5’, 10’, 15’, 30’ and 45 angles. Input current intensity can vary from 7.71 to 15.58 to the maximum temperature of water reached in the tank of 100 liters was 45.2’ C in the morning with an average radiation of 433.21 W·m-2 and a room temperature of 13.47’ C, over a period of 120 minutes. On the other hand, during the night when the radiation is 0 W·m-2 in the heat water pump operation the water reached a temperature of 31.2’C. The Photovoltaic system can test a real voltage demand of 2.44 kW·h which is an enough power to keep the energy required by a person. Implement a solar PV leads to very high startup investment costs, this investment will be recovered over a period of 4 years, 6 months and 17 days. The long life of the equipment can contribute to the environment, leaving issue of 0.87 tonnes of CO2 per year, can take advantage of 20 years about clean and free energy as the energy taken from the sun.
eu_rights_str_mv openAccess
format bachelorThesis
id UPS_eb357e0b2fcbe1dcd81b2dfe44272317
instacron_str UPS
institution UPS
instname_str Universidad Politécnica Salesiana
language spa
network_acronym_str UPS
network_name_str Repositorio Universidad Politécnica Salesiana
oai_identifier_str oai:dspace.ups.edu.ec:123456789/16142
publishDate 2018
reponame_str Repositorio Universidad Politécnica Salesiana
repository.mail.fl_str_mv .
repository.name.fl_str_mv Repositorio Universidad Politécnica Salesiana - Universidad Politécnica Salesiana
repository_id_str 1737
rights_invalid_str_mv Atribución-NoComercial-SinDerivadas 3.0 Ecuador
http://creativecommons.org/licenses/by-nc-nd/3.0/ec/
spelling Implementación de biomasa y energía solar en una vivienda ecológica temporal en la empresa Autopartes y Autogrúas FCN S.a. con una capacidad de 1.5 kW-h.Calán Pozo, Juan CarlosRuales Yépez, Álbaro PaúlENERGÍA SOLAR - APLICACIONESENERGÍAS ALTERNATIVASBOMBA DE CALORCONTENEDORES MARÍTIMOSPLACAS SOLARESRADIACIONES SOLARESThe present research project is to implement “Biomas” and solar energy into a temporary green home with a capacity of 1.5 kW·h; the equipment was tested under different climatic conditions. The taking results was followed through at an interval of 5 minutes for the heat pump and in the case of the photovoltaic system was tabulated every 20 minutes from 6:20 to 18:20 h for the selection of the optimum angle in Tulcán City where were carried out four days of test with 0’, 5’, 10’, 15’, 30’ and 45 angles. Input current intensity can vary from 7.71 to 15.58 to the maximum temperature of water reached in the tank of 100 liters was 45.2’ C in the morning with an average radiation of 433.21 W·m-2 and a room temperature of 13.47’ C, over a period of 120 minutes. On the other hand, during the night when the radiation is 0 W·m-2 in the heat water pump operation the water reached a temperature of 31.2’C. The Photovoltaic system can test a real voltage demand of 2.44 kW·h which is an enough power to keep the energy required by a person. Implement a solar PV leads to very high startup investment costs, this investment will be recovered over a period of 4 years, 6 months and 17 days. The long life of the equipment can contribute to the environment, leaving issue of 0.87 tonnes of CO2 per year, can take advantage of 20 years about clean and free energy as the energy taken from the sun.El presente proyecto de investigación consiste en implementar biomasa y energía solar en una vivienda ecológica temporal con una capacidad de 1.5 kW·h; el equipo fue probado bajo condiciones climáticas distintas. La toma de resultados se realizó en un intervalo de 5 minutos para la bomba de calor y en el caso del sistema fotovoltaico se tabularon cada 20 minutos desde las 6:20 hasta las 18:20, para la selección del ángulo óptimo en la ciudad de Tulcán se realizaron cuatro días de prueba con los ángulos 0˚, 5˚, 10˚, 15˚, 30˚ y 45˚. La intensidad de corriente de entrada puede variar entre 7.71 A hasta 15.58 A. La máxima temperatura del agua alcanzada en el tanque de 100 litros fue de 45.2 ºC en la mañana con radiación promedio de 433.21 W·m-2 y temperatura ambiente de 13.47 ºC en un periodo de 120 minutos. Por otro lado, durante la noche cuando la radiación fue de 0 W·m-2 y en funcionamiento de la bomba de calor, el agua alcanzó una temperatura de 31.2 ºC. El sistema fotovoltaico puede brindar una demanda real de 2.44 kW·h que es la energía necesaria para cumplir con la demanda energética de una persona. Implementar un sistema solar fotovoltaico conlleva a costos de inversión inicial muy elevados, ésta inversión se recuperará en un período de 4 años 6 meses y 17 días. La vida útil de los equipos se puede contribuir con el medio ambiente dejando de emitir 0.87 toneladas de CO2 en un año, se puede aprovechar 20 años aproximadamente de energía limpia y gratis como es la energía obtenida del sol.Quitiaquez Sarzosa, William Giovanny2018-10-01T18:14:30Z2018-10-01T18:14:30Z2018-09info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/bachelorThesisapplication/pdfhttp://dspace.ups.edu.ec/handle/123456789/16142spaAtribución-NoComercial-SinDerivadas 3.0 Ecuadorhttp://creativecommons.org/licenses/by-nc-nd/3.0/ec/info:eu-repo/semantics/openAccessreponame:Repositorio Universidad Politécnica Salesianainstname:Universidad Politécnica Salesianainstacron:UPS2019-01-01T18:53:18Zoai:dspace.ups.edu.ec:123456789/16142Institucionalhttps://dspace.ups.edu.ec/Institución privadahttps://www.ups.edu.ec/https://dspace.ups.edu.ec/oai.Ecuador...opendoar:17372019-01-01T18:53:18Repositorio Universidad Politécnica Salesiana - Universidad Politécnica Salesianafalse
spellingShingle Implementación de biomasa y energía solar en una vivienda ecológica temporal en la empresa Autopartes y Autogrúas FCN S.a. con una capacidad de 1.5 kW-h.
Calán Pozo, Juan Carlos
ENERGÍA SOLAR - APLICACIONES
ENERGÍAS ALTERNATIVAS
BOMBA DE CALOR
CONTENEDORES MARÍTIMOS
PLACAS SOLARES
RADIACIONES SOLARES
status_str publishedVersion
title Implementación de biomasa y energía solar en una vivienda ecológica temporal en la empresa Autopartes y Autogrúas FCN S.a. con una capacidad de 1.5 kW-h.
title_full Implementación de biomasa y energía solar en una vivienda ecológica temporal en la empresa Autopartes y Autogrúas FCN S.a. con una capacidad de 1.5 kW-h.
title_fullStr Implementación de biomasa y energía solar en una vivienda ecológica temporal en la empresa Autopartes y Autogrúas FCN S.a. con una capacidad de 1.5 kW-h.
title_full_unstemmed Implementación de biomasa y energía solar en una vivienda ecológica temporal en la empresa Autopartes y Autogrúas FCN S.a. con una capacidad de 1.5 kW-h.
title_short Implementación de biomasa y energía solar en una vivienda ecológica temporal en la empresa Autopartes y Autogrúas FCN S.a. con una capacidad de 1.5 kW-h.
title_sort Implementación de biomasa y energía solar en una vivienda ecológica temporal en la empresa Autopartes y Autogrúas FCN S.a. con una capacidad de 1.5 kW-h.
topic ENERGÍA SOLAR - APLICACIONES
ENERGÍAS ALTERNATIVAS
BOMBA DE CALOR
CONTENEDORES MARÍTIMOS
PLACAS SOLARES
RADIACIONES SOLARES
url http://dspace.ups.edu.ec/handle/123456789/16142