Implementación de un módulo HVAC para el análisis, control y monitoreo de variables de caudal y temperatura, mediante sistema scada
The research project has the purpose of implementing an HVAC module (control of temperature, ventilation and air conditioning), controlled by SCADA (Supervision, Control and Data Acquisition), for practices of control and monitoring of variables of flow and temperature , In the Laboratory of the Ele...
Guardat en:
| Autor principal: | |
|---|---|
| Altres autors: | |
| Format: | bachelorThesis |
| Idioma: | spa |
| Publicat: |
2017
|
| Matèries: | |
| Accés en línia: | http://repositorio.utc.edu.ec/handle/27000/4060 |
| Etiquetes: |
Afegir etiqueta
Sense etiquetes, Sigues el primer a etiquetar aquest registre!
|
Afegir etiqueta | Sumari: | The research project has the purpose of implementing an HVAC module (control of temperature, ventilation and air conditioning), controlled by SCADA (Supervision, Control and Data Acquisition), for practices of control and monitoring of variables of flow and temperature , In the Laboratory of the Electromechanical Engineering of the Technical University of Cotopaxi. Because it is important to obtain the control and visualization of the data of flow and temperature in real time, the man machine interface developed in software LabVIEW was designed for the visualization of data obtained by the sensors. In order to establish the design parameters of the HVAC module, the experimental scientific method was used, which allows measurement procedures, resulting in the diameters of each section of the duct, the power of the centrifugal fan and the accessories that comprise the pipeline system, as well as Actuators and transducers for the measurement of flow and temperature data. The data obtained is displayed in the LabVIEW software…. |
|---|