Diseño y construcción de un colector secador solar para quinua y amaranto aplicado al proyecto de granos andinos en la facultad caren en la universidad técnica de Cotopaxi.

The objective of the present project was to design, build and implement a Quinoa and Amaranth solar dryer collector and thus improve the drying process and storage quality of these products, to be subsequently planted or experienced in the Andean grains laboratory from the Technical University of Co...

Celý popis

Uloženo v:
Podrobná bibliografie
Hlavní autor: Alvarez Amores, Stalin Fabián (author)
Další autoři: Guano Rengifo, Luigi Ricardo (author)
Médium: bachelorThesis
Jazyk:spa
Vydáno: 2019
Témata:
On-line přístup:http://repositorio.utc.edu.ec/handle/27000/5501
Tagy: Přidat tag
Žádné tagy, Buďte první, kdo vytvoří štítek k tomuto záznamu!
_version_ 1822282027989204992
author Alvarez Amores, Stalin Fabián
author2 Guano Rengifo, Luigi Ricardo
author2_role author
author_facet Alvarez Amores, Stalin Fabián
Guano Rengifo, Luigi Ricardo
author_role author
collection Repositorio Universidad Técnica de Cotopaxi
dc.contributor.none.fl_str_mv Torres Tamayo, Enrique, PhD.
dc.creator.none.fl_str_mv Alvarez Amores, Stalin Fabián
Guano Rengifo, Luigi Ricardo
dc.date.none.fl_str_mv 2019-07
2020-07-27T12:16:02Z
2020-07-27T12:16:02Z
dc.format.none.fl_str_mv 130 páginas
dc.identifier.none.fl_str_mv Alvarez Amores Stalin Fabián Guano Rengifo Luigi Ricardo (2019); Diseño y construcción de un colector secador solar para quinua y amaranto aplicado al proyecto de granos andinos en la facultad caren en la universidad técnica de Cotopaxi. UTC. Latacunga. 130 p.
PI-001417
http://repositorio.utc.edu.ec/handle/27000/5501
dc.language.none.fl_str_mv spa
dc.publisher.none.fl_str_mv Ecuador: Latacunga: Universidad Técnica de Cotopaxi (UTC).
dc.rights.none.fl_str_mv http://creativecommons.org/licenses/by-nc-sa/3.0/ec/
info:eu-repo/semantics/openAccess
dc.source.none.fl_str_mv reponame:Repositorio Universidad Técnica de Cotopaxi
instname:Universidad Técnica de Cotopaxi
instacron:UTC
dc.subject.none.fl_str_mv COLECTOR
SECADOR SOLAR
FLUJO DE POTENSIA
MECÁNICA INTEGRAL
dc.title.none.fl_str_mv Diseño y construcción de un colector secador solar para quinua y amaranto aplicado al proyecto de granos andinos en la facultad caren en la universidad técnica de Cotopaxi.
dc.type.none.fl_str_mv info:eu-repo/semantics/publishedVersion
info:eu-repo/semantics/bachelorThesis
description The objective of the present project was to design, build and implement a Quinoa and Amaranth solar dryer collector and thus improve the drying process and storage quality of these products, to be subsequently planted or experienced in the Andean grains laboratory from the Technical University of Cotopaxi in its Salache campus. In the design of the dryer, a previous investigation was carried out to determine the ideal parameters, adapted to the working condition and quantity of the material to be dried. In the foreground, the theoretical framework is detailed, where solar drying technologies were investigated, as well as the types of dryers.In the second instance the methodology for the design is observed, where the most basic formulas for the design the solar dryer were taken into consideration, by means of the analysis the norms corresponding to the construction of this system, with which it was determined that a drying chamber has similar characteristics to those of an oven, in this sense it was decided to acquire a four-tray oven, which covers 1kg per tray, so the design the trays, was only similar in terms of measurements, with the variant that a 60 micron mesh was acquired so the flow of hot air through the grain circulates freely.At the request of the beneficiary it was necessary to implement an auxiliary electrical system, which guarantees a continuous flow of heat, which works with a temperature controller when the climatic conditions of the site are not favorable. The drying process will continue through the mentioned system.After the tests were performed, it was observed that it fulfilled the requested needs since the samples of 500g of Quinoa and 200g of Amaranth were dried in an average of 4 hours, until reaching its standards of 9% and 11% respectively, these standards were determined through the use of a precision balance and a humidity meter, taking data in half an hour, so that the expected expectations were met.
eu_rights_str_mv openAccess
format bachelorThesis
id UTC_e660b60ec347bb1dc3221d03e53912ba
identifier_str_mv Alvarez Amores Stalin Fabián Guano Rengifo Luigi Ricardo (2019); Diseño y construcción de un colector secador solar para quinua y amaranto aplicado al proyecto de granos andinos en la facultad caren en la universidad técnica de Cotopaxi. UTC. Latacunga. 130 p.
PI-001417
instacron_str UTC
institution UTC
instname_str Universidad Técnica de Cotopaxi
language spa
network_acronym_str UTC
network_name_str Repositorio Universidad Técnica de Cotopaxi
oai_identifier_str oai:oai:repositorio.utc.edu.ec:27000:27000/5501
publishDate 2019
publisher.none.fl_str_mv Ecuador: Latacunga: Universidad Técnica de Cotopaxi (UTC).
reponame_str Repositorio Universidad Técnica de Cotopaxi
repository.mail.fl_str_mv .
repository.name.fl_str_mv Repositorio Universidad Técnica de Cotopaxi - Universidad Técnica de Cotopaxi
repository_id_str 0
rights_invalid_str_mv http://creativecommons.org/licenses/by-nc-sa/3.0/ec/
spelling Diseño y construcción de un colector secador solar para quinua y amaranto aplicado al proyecto de granos andinos en la facultad caren en la universidad técnica de Cotopaxi.Alvarez Amores, Stalin FabiánGuano Rengifo, Luigi RicardoCOLECTORSECADOR SOLARFLUJO DE POTENSIAMECÁNICA INTEGRALThe objective of the present project was to design, build and implement a Quinoa and Amaranth solar dryer collector and thus improve the drying process and storage quality of these products, to be subsequently planted or experienced in the Andean grains laboratory from the Technical University of Cotopaxi in its Salache campus. In the design of the dryer, a previous investigation was carried out to determine the ideal parameters, adapted to the working condition and quantity of the material to be dried. In the foreground, the theoretical framework is detailed, where solar drying technologies were investigated, as well as the types of dryers.In the second instance the methodology for the design is observed, where the most basic formulas for the design the solar dryer were taken into consideration, by means of the analysis the norms corresponding to the construction of this system, with which it was determined that a drying chamber has similar characteristics to those of an oven, in this sense it was decided to acquire a four-tray oven, which covers 1kg per tray, so the design the trays, was only similar in terms of measurements, with the variant that a 60 micron mesh was acquired so the flow of hot air through the grain circulates freely.At the request of the beneficiary it was necessary to implement an auxiliary electrical system, which guarantees a continuous flow of heat, which works with a temperature controller when the climatic conditions of the site are not favorable. The drying process will continue through the mentioned system.After the tests were performed, it was observed that it fulfilled the requested needs since the samples of 500g of Quinoa and 200g of Amaranth were dried in an average of 4 hours, until reaching its standards of 9% and 11% respectively, these standards were determined through the use of a precision balance and a humidity meter, taking data in half an hour, so that the expected expectations were met.El presente proyecto de titulación tuvo como objetivo diseñar, construir e implementar un colector secador solar de Quinua y Amaranto y de esta manera mejorar el proceso de secado y la calidad al almacenamiento de dichos productos, para posteriormente ser sembrados o experimentados en el laboratorio de Granos Andinos de la Universidad Técnica de Cotopaxi en su campus Salache. En el diseño del secador se realizó una investigación previa para determinar los parámetros idóneos, adaptados a la condición de trabajo y cantidad del material a secar. En primer plano se detalla el marco teórico, en donde se investigó las tecnologías de secado solar, así como también los tipos de secadores. En segunda instancia se observa la metodología para el diseño, donde se tomó en consideración las fórmulas más elementales para el diseño del secador solar, por medio del análisis de las normas correspondientes a la construcción de estos sistemas, con lo cual se determinó que una cámara de secado posee características similares a las de un horno, en tal sentido se optó en adquirir un horno de cuatro bandejas, en las cuales abarca 1kg por cada bandeja, por lo que el diseño de las bandejas, solo fue similar en cuanto a medidas, con la variante de que se adquirió un malla de 60 micras para que circule libremente el flujo de aire caliente por el grano. Por requerimiento del beneficiario se hizo necesario implementar un sistema eléctrico auxiliar, el cual garantice un flujo continuo de calor, mismo que funciona con un controlador de temperatura con el cual cuando las condiciones climáticas del sitio no sean favorables el proceso de secado continuara por medio del sistema mencionado. Posteriormente realizadas las pruebas se observó que cumplía con las necesidades solicitadas ya que las muestras de 500g de Quinua y 200g de Amaranto fueron secadas en un promedio de 4 horas, hasta llegar a sus estándares de 9% y 11% respectivamente, estos estándares se determinaron por medio del uso de una balanza de precisión y de un medidor de humedad, tomando datos en lapsos de media hora, por lo que se cumplió con las expectativas esperadas.Ecuador: Latacunga: Universidad Técnica de Cotopaxi (UTC).Torres Tamayo, Enrique, PhD.2020-07-27T12:16:02Z2020-07-27T12:16:02Z2019-07info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/bachelorThesis130 páginasAlvarez Amores Stalin Fabián Guano Rengifo Luigi Ricardo (2019); Diseño y construcción de un colector secador solar para quinua y amaranto aplicado al proyecto de granos andinos en la facultad caren en la universidad técnica de Cotopaxi. UTC. Latacunga. 130 p.PI-001417http://repositorio.utc.edu.ec/handle/27000/5501spahttp://creativecommons.org/licenses/by-nc-sa/3.0/ec/info:eu-repo/semantics/openAccessreponame:Repositorio Universidad Técnica de Cotopaxiinstname:Universidad Técnica de Cotopaxiinstacron:UTC2020-07-28T08:00:35Zoai:oai:repositorio.utc.edu.ec:27000:27000/5501Institucionalhttp://repositorio.utc.edu.ec/Universidad públicahttps://www.utc.edu.ec/..Ecuador...opendoar:02025-01-26T03:44:13.973425Repositorio Universidad Técnica de Cotopaxi - Universidad Técnica de Cotopaxitrue
spellingShingle Diseño y construcción de un colector secador solar para quinua y amaranto aplicado al proyecto de granos andinos en la facultad caren en la universidad técnica de Cotopaxi.
Alvarez Amores, Stalin Fabián
COLECTOR
SECADOR SOLAR
FLUJO DE POTENSIA
MECÁNICA INTEGRAL
status_str publishedVersion
title Diseño y construcción de un colector secador solar para quinua y amaranto aplicado al proyecto de granos andinos en la facultad caren en la universidad técnica de Cotopaxi.
title_full Diseño y construcción de un colector secador solar para quinua y amaranto aplicado al proyecto de granos andinos en la facultad caren en la universidad técnica de Cotopaxi.
title_fullStr Diseño y construcción de un colector secador solar para quinua y amaranto aplicado al proyecto de granos andinos en la facultad caren en la universidad técnica de Cotopaxi.
title_full_unstemmed Diseño y construcción de un colector secador solar para quinua y amaranto aplicado al proyecto de granos andinos en la facultad caren en la universidad técnica de Cotopaxi.
title_short Diseño y construcción de un colector secador solar para quinua y amaranto aplicado al proyecto de granos andinos en la facultad caren en la universidad técnica de Cotopaxi.
title_sort Diseño y construcción de un colector secador solar para quinua y amaranto aplicado al proyecto de granos andinos en la facultad caren en la universidad técnica de Cotopaxi.
topic COLECTOR
SECADOR SOLAR
FLUJO DE POTENSIA
MECÁNICA INTEGRAL
url http://repositorio.utc.edu.ec/handle/27000/5501