Automation of a Universal Testing Machine for Measuring Mechanical Properties in Textile Fibers

Automation of a Universal Testing Machine for Measuring Mechanical Properties in Textile Fibers

The purpose of this paper is to design a control system to perform tensile and compression tests on textile fibers and sponges in a universal testing machine. In order to design the control system, a supervisory and front panel was implemented to enter the parameters used to develop the tensile and...

Kaydedildi:

Detaylı Bibliyografya
Yazar:	Topón-Visarrea, Blanca (author)
Diğer Yazarlar:	Zapata, Mireya (author), Vallejo-Mancero, Fernando (author)
Materyal Türü:	article
Dil:	eng
Baskı/Yayın Bilgisi:	2020
Online Erişim:	https://link.springer.com/chapter/10.1007/978-3-030-32033-1_18 https://hdl.handle.net/20.500.14809/3413
Etiketler:	Etiketle Etiket eklenmemiş, İlk siz ekleyin!

Benzer Materyaller

State of the art in the use of carbon fibers and their mechanical properties
Yazar:: Procel Mayacela, Milton Francisco
Baskı/Yayın Bilgisi: (2022)

Influence of Recycled Aggregates on the Mechanical Properties of Synthetic Fibers-Reinforced Masonry Mortars
Yazar:: Vega, Gabriela
Baskı/Yayın Bilgisi: (2021)

Improvement of the mechanical properties of recycled polypropylene through addition of vegetable fibers, polyethylene terphthalate and heat treatment.
Yazar:: Palmay, Paul
Baskı/Yayın Bilgisi: (2022)

First-principles and machine learning investigations into the atomic and mechanical properties of cement hydrates
Yazar:: Balarezo Balarezo, Juan Gabriel
Baskı/Yayın Bilgisi: (2025)

Antimicrobial properties of plant fibers for biomedical applications
Yazar:: Miño Toro, Karla Wanda
Baskı/Yayın Bilgisi: (2019)

Design of an Automatic System for the Heat Shrink Blow Molding Process as a Measure to Reduce Ergonomic Risks
Yazar:: Topón-Visarrea, Blanca
Baskı/Yayın Bilgisi: (2023)

Mechanisms to measure the effectiveness of international tribunals and its relationship with judgement compliance.
Yazar:: Carbonell-Yánez, María-Helena
Baskı/Yayın Bilgisi: (2024)

Structural characterization and electrochemical properties of natural carbon fibers decorated with nanoparticles
Yazar:: Gaona Torres, Steven Javier
Baskı/Yayın Bilgisi: (2021)

Study of the mechanical performance and durability of mortars reinforced with treated and untreated cabuya fiber
Yazar:: Guerrero, Viviana
Baskı/Yayın Bilgisi: (2021)

Study of the effectiveness of taking measurements of mechanical vibrations on irregular and non-rigid surfaces
Yazar:: Hernández-Dávila, Eduardo
Baskı/Yayın Bilgisi: (2020)

Characterization, mechanical properties, and degradation of thermoplastic starch and cellulose blends
Yazar:: Yanchapaxi Velasco, Adrián Xavier
Baskı/Yayın Bilgisi: (2022)

Optimization of Cellulose Extraction Protocol for the Obtention of Fibers with Immunostimulant Properties to Treat Litopenaeus vannamei Vibriosis
Yazar:: Yánez Vaca, Sabrina Abigail
Baskı/Yayın Bilgisi: (2020)

Measures to minimize the consumption of public utilities for the maintenance of common property in multiple dwelling units
Yazar:: L. Filimonov, Sergei
Baskı/Yayın Bilgisi: (2021)

Measures to minimize the consumption of public utilities for the maintenance of common property in multiple dwelling units
Yazar:: L. Filimonov, Sergei
Baskı/Yayın Bilgisi: (2021)

Physical and mechanical properties of plastic recyclables produced in Ecuador as construction material
Yazar:: Sangucho-Barros, Darwin Santiago
Baskı/Yayın Bilgisi: (2023)

A review on chitosan-based composite film reinforced with cellulose: morphology and mechanical properties
Yazar:: Sengés Bravo, Alejandro Iván
Baskı/Yayın Bilgisi: (2021)

Conductance measurements on atomic-sized contacts of gold using a low-cost mechanically controllable break junction equipment
Yazar:: Borja Espinosa, Carla Nataly
Baskı/Yayın Bilgisi: (2020)

Influence of additives (polymers and polyaluminum) in the physical mechanical properties of hot asphaltic mixtures
Yazar:: León Torres, Paul Javier
Baskı/Yayın Bilgisi: (2020)

Improving the behavior of thermoplastic starch with the addition of gum Arabic: Antibacterial, mechanical properties and biodegradability.
Yazar:: López Terán, J.L.
Baskı/Yayın Bilgisi: (2024)

Influence of the automation of the total luminous flux test on the calculation of the combined uncertainty and the period of execution of the test
Yazar:: De la Bastida, Ronny
Baskı/Yayın Bilgisi: (2018)

IMPROVEMENT OF THE MECHANICAL PROPERTIES OF A CEMENTITIAL COMPOSITE SYSTEM USING A DESIGNED SISAL FABRIC
Yazar:: Cevallos, Oscar-A.
Baskı/Yayın Bilgisi: (2018)

The Conflict Between Quality Service and Coverage Expansion. The Case of Automating Teller Machine (ATM)
Yazar:: de la Lama-Zubirán, Paula
Baskı/Yayın Bilgisi: (2024)

The Conflict Between Quality Service and Coverage Expansion. The Case of Automating Teller Machine (ATM)
Yazar:: de la Lama-Zubirán, Paula
Baskı/Yayın Bilgisi: (2024)

Study of the composition effect on the mechanical properties of a material made by Ecuadorian clay and sand for CO2 capture.
Yazar:: Iglesias Palacios, Isaac Alexander
Baskı/Yayın Bilgisi: (2020)

Fabrication and sustained release properties of poly(epsilon-caprolactone) electrospun fibers loaded with layered double hydroxide nanoparticles intercalated with amoxicillin
Yazar:: Malagon Aviles, O.
Baskı/Yayın Bilgisi: (2012)

Evaluation of the Mechanical and Physical Properties of Portland Cement Mortar with the Addition of Rosin Resin in Confined Masonry Walls
Yazar:: Puicon Rodriguez, Fabriccio Omar
Baskı/Yayın Bilgisi: (2025)

Innovation in sustainable infrastructure: advanced analysis of the mechanical properties of permeable pavers for resilient and eco-efficient construction
Yazar:: Alvansazyazdi, Mohammadfarid
Baskı/Yayın Bilgisi: (2025)

First-principles studies of the electronic and mechanical properties of -Al/-Al2O3(111) multilayer composite
Yazar:: Vásconez López, Edwin Marcelo
Baskı/Yayın Bilgisi: (2020)

COMPARATIVE ANALYSIS OF PHYSIC AND MECHANICAL PROPERTIES OF TEAK WOOD (Tectona grandis L.F.) FROM QUEVEDO AND BALZAR
Yazar:: Crespo Gutiérrez, Rommel
Baskı/Yayın Bilgisi: (2008)

Automation of an Electro-Hydraulic Test Bench Using a Weitek CMT3092 HMI- PLC
Yazar:: Altamirano-Haro, Diego
Baskı/Yayın Bilgisi: (2022)

COMPARATIVE ANALYSIS OF PHYSIC AND MECHANICAL PROPERTIES OF FERNAN SANCHEZ WOOD (Triplaris cumingiana Fish. Mey.) FROM QUEVEDO AND BALZAR
Yazar:: Crespo Gutiérrez, Rommel
Baskı/Yayın Bilgisi: (2008)

Effect of husk rice SiO2 on the thermal and mechanical properties of PLLA/PEG/SiO2 composites
Yazar:: Morales Carrera, Johanna Belen
Baskı/Yayın Bilgisi: (2022)

TiO2 nanorods coated onto nylon 6 nanofibers using hydrothermal treatment with improved mechanical properties
Yazar:: Abdal-Hay, A
Baskı/Yayın Bilgisi: (2014)

Mechanical properties and X-ray diffraction analyses of clay/sand pellets for CO2 adsorption: the effects of sand content and humidity
Yazar:: Gallardo Aguilar, Andrea Michelle
Baskı/Yayın Bilgisi: (2021)

Simulation of an Automated System with Hardware in the Loop Using a Human Machine Interface (HMI) for the Process of Bottling Liquids Employing Unity 3D
Yazar:: Rivas, Fabián
Baskı/Yayın Bilgisi: (2024)

Expert system with facial recognition implemented in human-machine conversation services for the automation of multi-platform remote processes in the identification of people reported missing.
Yazar:: Ortiz Araujo, Cindy Pamela
Baskı/Yayın Bilgisi: (2022)

Formation of inter-ethnic tolerance of university students as a mechanism of successful inter-cultural education
Yazar:: B. Garipov, Ilnur
Baskı/Yayın Bilgisi: (2019)

Formation of inter-ethnic tolerance of university students as a mechanism of successful inter-cultural education
Yazar:: B. Garipov, Ilnur
Baskı/Yayın Bilgisi: (2019)

Alcohol consumption in university students. Case study: Espoch - school of mechanical engineering
Yazar:: Altamirano Balseca, Marco
Baskı/Yayın Bilgisi: (2020)

Measurement of liquidity, insolvency and market risk levels in the textile sector of Ecuador
Yazar:: Orellana Osorio, Iván
Baskı/Yayın Bilgisi: (2020)